72´´ X 80,000 LBS. PRO-ECO PICKLE LINE (USED)

Pickling Capabilities: Nominal Coil Width: Thickness Range: .054" -.500" @ 48" .054" - .375" @ 72" Coil O.D.: Entry: 36" Minimum, 80" Nominal (Clearance for coils sprung to 96" Diameter) Exit: 36" Minimum, 80" Maximum Coil I.D.: Entry: 24" - 30" Exit: 24" Strip Parameters: Line Speed: 25 FPM - 500 FPM* Threading Speed: 15 FPM - 300 FPM (500 FPM when moving up to exit shear) Cropping Shear Cycle: 20 Cuts Per Minute @ 12" Long, 10 Cuts Per Minute @ 48" Long The design criteria for the machinery is as indicated. The machinery will process higher strength materials in lighter gauges. Line speed capability varies depending on material scale condition) Can produce HRP-Dry/HRP-oil/HRP-Dry Lube Can provide inspections including X-Ray Gauge Production Capabilities: Production capacity at the 300 ft/min design speed is between 70 and 100 tons per hour, depending on average coil weights of 25 tons, gauge, width, and steel grade, and when close coupled with a tension leveler and anti-coil breaker roll. The combination of tension leveling, in-line and ahead of pickling, is ideally suited for the heights quality of shape and surface control. With an 18 turn per week schedule, production of 500,000 to 700,000 ton per year is forecast. Slitting Capabilities: Material Type: Hot Rolled Edge Trim Requirements Per Edge: .100"-.250" 1/2", Over .250" - 1" Coil Width Entry: 30" Minimum, 74" Maximum Exit: 8.5" Minimum, 72" Maximum Coil Weight Entry & Exit Maximum: 80,000 Lbs. Thickness Range: .054" -.500" @ 48" .054" - .375" @ 72" Coil O.D.: Entry: 36" Minimum, 84" Maximum Exit: 36" Minimum, 80" Maximum Entry: 16" - 30" Exit: 24" or 30" Line Speed Maximum: Can Strip Coils Able to provide Packaging Options Can provide Edge Trimming and Slitting Mults Line Includes: Uncoiler Hold-Down Roll 10" Diameter 24" Face Width Hardened Steel Roll Covering Anti-Coil Break Work Roll 2-1/2" Diameter 78" Face Width 52000 (Rc 60) Hardened Steel Roll Covering Anti-Coil Break Back-Up Roll (2) 6" Diameter 78" Face Width Hardened Steel Roll Covering Flattener Entry Pinch Rolls Lower: 24" Diameter, 78" Face Width, Hardened, Textured & Chrome Plated Roll Covering Flattener Work Rolls (14) 6.5" Diameter 78" Face Width Hardened Steel Roll Covering Shear Pinch Rolls Upper: 8" Diameter, 78" Face Width, Polyurethane Roll Covering (2) Scrap Conveyor Rolls 3-1/2" Diameter 52" Face Width Steel Roll Covering Pinch Rolls (2) 12" Diameter 78" Face Width Polyurethane Roll Covering Threading Table Carry-Over Rolls 4" Diameter 78" Face Width Polyurethane Roll Covering Steering Rolls (2) 10" Diameter 84" Face Width Polyurethane Roll Covering Tension Rolls (4) 16" Diameter 78" Face Width 3M Non-Woven & Textured Mill Roll Covering Oiler Rolls (2) 10" Diameter 78" Face Width 3M Non-Woven & Textured Mill Roll Covering Exit Upper Pinch Roll 12" Diameter 78" Face Width Polyurethane Roll Covering Exit Lower Pinch Roll 24" Diameter 78" Face Width Hardened, Textured & Chrome Plated Slitter Heads, 3 Heads 10-1/2” Arbor Recoiler 78" Face Width x 24" Diameter Drum 24" - 30" I.D. Range 80,000 Lbs. Weight Capacity 10" Diameter 300 HP, 500/2000 RPM DC Motor Polyurethane Roll Covering Coil Car Blocker Rolls (2) 10" Diameter 48" Face Width Polyurethane Roll Covering