96´´ BLISS REVERSING HOT MILL (USED)
Specifications
| Manufacturer | E. W. Bliss |
| Model | Up-Cut Shear |
| Year | 1958 |
| Condition | Used |
| Stock Number | VX-17426 |
| Roll size | 30"/36" x 55" x 96" |
| Width maximum | 96" |
| Speed maximum | 660 FPM |
| Broadside maximum | 96" |
| Weight maximum | 35,000 Lbs. |
| Ingot size maximum | 22" x 75" x 240" |
| Oil type | Soluble Oil and Water (Far Best CH207B) |
| Coolant sump pumps | (2) Ingersoll 1400 gpm @ 20 psi |
| Coolant supply pumps | (2) Ingersoll 1500 gpm @ 110 psi |
| Storage tank | (2) 20,000 gallons |
| Coolant control system | Valvtrol |
| Rolls | 42" Diameter x 24" Face |
| Strip speed maximum | 660 FPM |
| Width opening | 22" Minimum, 96" Maximum |
| Edger roll speed | 30/60 RPM |
| Opening side guides | 24" Minimum, 130" Maximum |
| Table roll drives | Each Half Roll Individual 2.6 HP, 200 RPM Output |
| Roll length | 96" |
| Sheet width | 24" Minimum, 90" Maximum |
| Table speed | Either Automatic with Mill or Manually Selected by Pulpit Operator |
| Tables g and h | 2.6 HP, 200 RPM, 230V, PMDD Motors |
| Opening maximum | 12" |
| Crop size maximum | 12" |
| Shear drive | 2" Thick x 90" Wide or 3" Thick x 65" Wide |
| Cut maximum | 1" Thick x 90" Wide (Hot Metal) |
Description
Line Includes: Mill Drive Motor: 5000 HP, 0/35/70 RPM @ 600V, 0/40.8/81.6 RPM @ 700V, DC Motor thru Pinion Stand and Spindles, Develops Maximum Torque @ 225% Overload 250% Overload - Momentary 275% Overload -Instantaneous (Work Rolls Driven) 96" Reversing Hot Mill Coolant System: Hot Mill Vertical Edger: Edger Drive Motor: (1) 1500 HP, 250/500 RPM, DC Motor With Variable Voltage Control Develops Maximum Torque @ 225% Overload 250% Overload - Momentary 275% Overload - Instantaneous Operating Table & Guides: 230V Permanent Magnet DC Motors Hot Mill Run Out Tables: Tables A, Band E1: 5.2 HP, 215 RPM, 230V, PMDD Motors Tables E2, F1, F2, F3: 4 HP, 200 RPM, 230V, DC Motors 2" x 96" Hot Mill Shear: Manufacturer: Stamco Year Manufactured: 1958 Speed Maximum: 18 Strokes Per Minute (Based on 100,000 psi Shear Strength @ 600 F) Auxiliary Equipment: Scrap Chute Logan Scrap Conveyor 1" x 96" Hot Mill Plate Shear: Manufacturer: Stamco Year Manufactured: 1958 Type: Up-Down Cut Shear Shear Drive: 50 HP, 900 RPM, 440V, AC Motor and Control Auxiliary Equipment: Scrap Chute Scrap Conveyor