48´´ X .190´´ X 22,000 LB. STRILICH FLYING CUT TO LENGTH LINE
Specifications
| Manufacturer | Strilich Technologies, Inc. |
| Condition | Used |
| Stock Number | VX-2258 |
| Material | Aluminum |
| Coil weight entry | 22,000 Lbs. |
| Coil o.d. entry | 72" |
| Coil i.d. entry | 20" |
| Coil width entry | 22"-48" |
| Strip thickness entry | .040"-.190" |
| Cut to length range | 36"-148-1/4" |
| Line speed | 0-125 FPM (infinitely variable) |
| Sheet flatness | Straightener (Remove Coil Set Only) |
| Passline | 48" through Flying Shear |
| Electrical supply | 480 Volts/3 phase/60 hz |
| Compressed air supply | 480 'Jolts/3 phase/50 hz |
| Direction of feed | Right to Left |
| Maximum coil weight | 22,000 Lbs. |
| Maximum coil width | 48" |
| Maximum coil width capacity | 48" |
| Maximum strip width | 48" |
| Maximum material width | 48" |
| Maximum strip width capacity | 48" |
| 7 work rolls (3 over 4) | hardened and ground work rolls in each machine |
Description
Line Specifications: Shear Stress: 35,000 - 50,000 psi Yield Stress: 35,000 - 50,000 psi Stacker: Automatic Drop Type - 6,000 Lbs. Capacity Equipment Specifications: Strilich Hydraulic side Mast Type Coil Car 0-28" full load vertical coil lift capacity allows the removal of partially run coils and requires no foundation trench Vertical lift through hydraulic cylinder action with safety check valve Hydraulic power supplied from main stock reel power pack Electrical pushbutton controls operate vertical lift and horizontal travel Hydraulic drive provides positive horizontal travel Strilich Single Mandrel Stock Reel With 22,000 Lbs. Maximum Coil Weight Capacity 72" maximum coil O.D. 18-1/2" to 24-1/2" hydraulic three arm mandrel expansion range Heavy steel cover leaves with tapered nose for easy coil loading Wedge type expansion provides coil stability and constant hydraulic loading through the entire expansion range Designed for accessibility and easy maintenance