9-1/2´´ & 34´´ X 64´´ 4-HI LEWIS/BLAW-KNOX NON-REVERSING FOIL MILL (USED)
orCall (734) 854-8700
Specifications
| Condition | Used |
| Stock Number | VX-17025 |
| Maximum entry gauge | .030" |
| Minimum entry gauge | .00058" |
| Maximum finish gauge | .020" |
| Maximum width | 53 3/4" |
| Minimum width | 21" |
| Maximum o.d. | 57" |
| Minimum o.d. | Above 22 1/8" |
| Maximum weight | 10,000 Lb. |
| Reduction/pass-maximum | 50% |
| Mill | 1000 HP, 575/1185 RPM |
| Face | 64" |
| Minimum diameter | 8 3/4" |
| Maximum diameter | 9 1/2" |
| Material | Forged Steel |
| Scleroscope | 97-100 |
| Minimum hardness pene. | 5/8" |
| Weight/roll | 1,860 Lb. |
| Minimum hardness pene | 5/8" |
Description
GAUGE RANGES Minimum Finish Gauge - Single: .00045" Minimum Finish Gauge - Double: .00025" COIL SIZE SPEED 0/1420/2950 RPM MOTORS UNWIND MOTOR 60:1 Low (2): 50 HP, 300/900 In Tandem 95:1 High: DOUBLING UNWIND 95:1 Low (2): 50 HP, 300/900 RPM 645:1 High: REWIND 05:1 Low (2) : 75 HP, 400/1200 RPM 645:1 High: 1:1 High: 50 HP, 300/900 RPM WORK ROLLS BACKUP ROLLS Face: 62" Minimum Diameter: 31 1/8" Maximum Diameter: 34" Material: Alloy Cast Steel Forged Steel Cast Iron Scleroscope: Cast Steel 57-63 Forged Steel 65-70 Cast Iron 75-80 Weight/Roll - EST: 19,500 Lb.