1-1/4´´ (31.7 mm) x .049´´ (1.24 mm) YODER M1-1/2 ERW Tube Mill Line (USED)
Specifications
| Manufacturer | YODER |
| Model | M1-1/2 |
| Year | 1995 |
| Condition | Used |
| Stock Number | VX-17478 |
| Line direction | Right to Left |
| Maximum tube diameter | 1-1/4" (31.7 mm) |
| Minimum tube diameter | .313" (7.95 mm) |
| Maximum wall thickness | .049" (1.24 mm) |
| Minimum wall thickness | .020" (.508 mm) |
| Maximum line speed | 150 FPM, Max. Gear In Speed, No Load |
| Maximum material yield | 50,000 PSI |
| Spindle diameter | 1-1/2" |
| Roll space forming, fin & sizing | 8" |
| Horizontal centers | 11" |
| Motor | 15 HP, 1145 RPM |
Description
Maximum D/T Ratio: 60:1 Minimum D/T Ratio: 10:1 GEAR BOX DATA: ENTRY EQUIPMENT: (1) 3,000 Lb. KENT Model SKD-3000 Double Uncoiler (1) GUILD Model PSA-2000 Shear & End Welder (1) DMC Vertical Accumulator Year: 2002 FORMING MILL: (1) Entry Guide with (2) Edge Trimmers (3) Driven Breakdown Stands with Oil Re Circulation (5) Idle Side Rolls with Vertical Adjustment (3) Driven Fin Stands with Oil Re Circulation WELDING SECTION: (1) YODER 75 KVA Rotary Resistance Welder with PILLAR Solid State Control Frequency 400 - 600 Hz (1) Seam Guide with Vertical Adjustment (1) 2-Roll Weld Pressure (1) Scarfing Stand (1) Bead Winder (1) 6' Flood Type Coolant Section SIZING MILL: (4) Driven Sizing Stands with Oil Re Circulation (4) Idle Side Rolls with Vertical Adjustment (1) Encoder Stand CUT OFF: (1) 4-Post YODER Model P-40 Cut-Off Single Cut Die Set with Hydraulic Accelerator (1) 22' Single Dump Run Out Table MILL DRIVE: (1) Forming Motor, 50 HP AC, 1770 RPM, 460 / 60 / 3 (1) Sizing Motor, 50 HP AC, 1770 RPM, 460 / 60 / 3 (1) SIEMENS AC Drive Cabinet (1) Push Button Station EQUIPPED WITH: Multiple Spares Multiple Sets of Tooling