60" x .250" x 40,000# Paxson Slitting Line with Banding Line (Used)

General Specifications:

Material: HRS, CRS, HRPO, Galvanized / Maximum Strength: 50,000 PSI Shear, 40,000 PSI Yield

Thickness: .015" - .250"

Coil Weight Capacity: 40,000 lbs.

Coil Width (Maximum): 60" Trimmed, 62" Untrimmed

Coil I.D.: Entry: 20" - 24" / Exit 20"

Coil O.D.: Entry: 42" - 72" / Exit: 42" - 72"

Line Speed: Two-Speed, 130 and 390 FPM @ bare drum

Line Direction: Right to Left

Mode of Operation: Pull-Thru & Drive Assist

Complete with the Following Components:

Entry Coil Car:

• L-Type

• Self-Contained Hydraulic Power Unit

• Hydraulic Lift & Travel

Uncoiler:

• Hydraulic Expansion: 20" - 24"

• 4-Segment Pumpkin Tooth Mandrel

• Powered Overarm Hold-Down

• Slide Base

• Hydraulic Motor Feed-up

• Water Cooled Brake

Hydraulic Peeler Table

Slitter Entry Unit:

• Driven Pinch Rolls

• Independent Manual Adj. Roller Side Guides

• Roller Crop Shear

Slitter Head:

• Removable Type, (1) Head

• Over Arbor Outboard - Can Travel up to 36" Wide

• 150 HP DC Motor, 1750/2000 RPM, 500 V

• Reducer w/60.7:1 ratio

• Pinion Stand

• Arbors: 10" Diameter

Stand Slides in for Smaller Widths

Hydraulic Lift Table for Threading

Recoiler:

• Face Drum: 20" Dia. x 65"

• Hydraulic Grip & Expand

• Overarm Separator

• 100 HP DC Motor 650/1950 RPM, 500 V

• Integral Reducer w/24:1 ratio

• 2 Speed Drive-All Transmission w/1:1 and 3:1 ratios

Exit Coil Car:

• L-Type

• Hold-down Arm

• Keeper Arms

• Strapping Slots in Base

• Self-Contained Hydraulic Power Unit

• Hydraulic Lift and Travel

2-Arm Turnstile:

• Power Rotation

(2) Heavy Duty Scrap Winders:

• Opposed Cones

• Level Wind

• Auto Dump

• Hydraulic Motor Drive

Full Auto Strapping Unit w/Automated Strapping Table:

• 4-Arm Turnstile w/Hydraulic Push-Off

- Arms 64" Long

• Single Coil Tilt Table (to lay coil down)

• Coil Rotating Table w/Auto SIGNODE Strapper

- Straps Coil from I.D. to O.D.

• Single Coil Lifting Table (lifts coil and transfers it to storage table)

• Coil Storage Table

- 35' Long x 6' Wide

Slitter Tooling:

• Large amount of Knives, Spacers and Rubbers