ILG ( In-Line Hot Dip Galvanizing) & 2.5 inch ERW Pipe Mill / Continuous 200 MPM (USED)

Basic Specifications:

Operation Date: Jun.2008.                                                                                                 

Facility Manufacturer: Galvanizing Equipment: Superior Technologies(USA) Piping Equipment: TSE (Korea)          

Technical Specifications:

Flow Direction: Right ⟶ Left

Total Power: 4,000 KVA

        *Induction Heater: 2000KVA, Exclude Utilities Facility

Welding Type: High Frequency Electrical Resistance Welding (Solid-state)

Line Speed: max 200 m/min

Cutting Precision: +/- 2mm

 Footprint: 120m x 10m (Approximately) *Can be reduced by 10~20m

 Material Specifications

Type: CR, FH, PO    

Thickness (Gauge): 1.0 mm (.039”)  ~ 4.0 mm (.158”)

Grade Yield Strength: max 680MPa

Ultimate Tensile Strength: max 750MPa

Coil I.D/O.D: 508 mm (20”) ~ 2000 mm (78.7”)

Max Coil Weight: 5,500Kg

Strip Width: 60 mm (2.4”)~ 240 mm (9.5”)                                                                           

Product Specifications

Dimension:

Tube Size: ϕ21.0, ϕ22.2, ϕ25.4, ϕ26.5, ϕ31.8, ϕ33.3, ϕ41.9, ϕ48.6, ϕ60.5, ϕ76.3, 50X50

Tube Thickness: 1.0 t ~ 4.0 t

Length: min 4 m ~ max 14 m

Application: Structural, Agricultural tube

Electrical Specifications:

Main Power Supply:     440V, 3Ph, 60Hz

*Induction Heater: 575V, 3Ph, 60Hz                                                                                    

Auxiliary Power: 24V, 110V, 220V  *Selp Supplied

DC/AC Motor Enclosure: Complete enclosure, fan cooled                                                     

PLC/Drive:

- Forming & Sizing: Parker, LS

- Galvanizing: ALLEN-BRADLEY

- Press Cutter (Alpha Cutter) : UNICO, Rockwell                                                                  

* Services:

   Pneumatic Source:

      Pressure : 6~7 bar

        Volume: 60㎥/min * To be supplied by user

      Water Supply             3.0 ㎥/HR                                                                                   

     LNG (Liquified natural gas)

        Pressure: 0.5 bar Volume : 85 ㎥/HR         

       N2 Gas (Liquid nitrogen)   

     Purity: min 99.99%

     Pressure : 6~7 bar (gas)

    Volume : 700 L/HR (Liquid)                                                                                            

 Environmental Facility  

 - RTO(Regenerative Thermal Oxidation) : 1 System(150㎥/min)

 - Wet Scrubber : 3 Set(120, 160, 90㎥/min) *FRP Housing

 - Bag Filtter : 1 Set(150 ㎥/min)