120W Deburring Line

BASIC SPECIFICATION

-RAW MATERIAL: STAINLESS STEEL 300 & 400 SERIES

-WIDTH: 6~120mm

-THICKNESS: 0.1 mm ~ 1.5 mm (TOTAL CROSS SECTION WILL EB MAX. 100mm²)

MECHANICAL PROPERTIES

-YIELD STRENGTH: 190 Kg/mm² MAX

-ULTIMATE STRENGTH: 200 Kg/mm² MAX

-SHEAR STRENGTH: 195 Kg/mm² MAX

INCOMMING COIL SPEC

-COIL I.D: Ф304mm(Ф400, Ф508mm attachment)

-COIL O.D: MAX. Ф1,200mm

-COIL WEIGHT: MAX. 600Kgs

FINISH COIL SPEC.

-COIL I.D: Ф300mm, Ф400mm, Ф500mm

-COIL O.D: MAX. Ф1.200mm

-COIL WEIGHT: MAX. 600Kgs

LINE SPEED: MAX. 80 MPM

DEBURRING UNIT: BUYER SUPPLY

LINE DIRECTION: FROM RIGHT TO LEFT (CAN BE DECIDED LATER)

ELECTRICAL SOURCE

-MAIN POWER: AC 400V +-/ 5%, 50HZ +/-3%, 3 PHASE

-CONTROL POWER: AC 220V, SINGLE PHASE, DC24V

PNEUMATIC SOURCE: MAX. PRESSURE 7 kg/cm²

(NORMAL PRESSURE 5 kg/cm²)

CONSTITUTION OF THE LINE

-PAY OFF REEL: 1 SET

-ENTRY BACK TENSION DEVICE: 1 SET

-DEBURRING UNIT: BUYER SUPPLY

-PULLING DEVICE: 1 SET

-TENSION REEL: 1 SET

-PNEUMATIC SYSTEM: 1 SET

-ELECTRIC CONTROL SYSTEM: 1 SET

TECHNICAL SPECIFICATION

PAY OFF REEL

- TYPE: OVERHUNG TYPE OVER UNWINDING SYSTEM

- MANDREL SIZE

COLLAPSED DIA: (W/OUT ATTACHMENT) 296mm

TRUE CIRCLE: (W/OUT ATTACHMENT) 304mm

EXPANDED DIA: (W/OUT ATTACHMENT) 308mm

- DRUM: LINK TYPE FOUR(4) SEGMENTS

- ATTACHEMENT: Ф 406, Ф508mm

- MANDREL EXPAND: BY MANUAL

-TENSION CONTROL: BY BAND BRAKE (MANUAL ADJUSTMENT )

-EDGE ALIGNMENT: BY MANUAL AT COIL LOADING

MR MIRAE TECH INC REV.5 / NOV.10. 2012

HORIZONTAL PAY OFF REEL

-ТУРЕ: HORIZONTAL TYPE

- DRUM: LINK TYPE FOUR(4) SEGMENTS

- COIL ID: Ф304mm

-ATTACHMENT: 400 & 508 mm

- MANDREL EXPAND: BY MANUAL

-TENSION CONTROL: BY BAND BRAKE (MANUAL ADJUSTMENT)

ENTRY BACK TENSION DEVICE

-TYPE: ROLL TYPE

-ROLL SPECIFICATION

DIMENSION: Ф300 x 170mm

SURFACE CONDITION: POLYURETHANE COVERED

-NO. OF ROLL: 3

-NO. OF TENSION ROLL: 1

-NO. OF GUIDE ROLL: 2

-TYPE OF BACK TENSION: BY POWDER BRAKE

-CONTROL OF TENSION: BY MANUAL ADJUSTMENT

PULLING DEVICE

-TYPE: ROLL TYPE

-ROLL SPECIFICATION

DIMENSION: Ф300 x 170mm

SURFACE CONDITION: POLYURETHANE COVERED

-NO. OF ROLL: 3

-NO. OF TENSION ROLL: 1

-NO. OF GUIDE ROLL: 2

-TYPE OF DRIVE: BY AC GEARED MOTOR WITH INVERTER CONTROL (5.5KW X 4P)

TENSION REEL

-TYPE: SOLID KEY SHAFT TYPE

- COIL SIZE: MAX Ф1200mm

- WINDING SHAFT

DIA. : Ф80

MATERIAL: SCM440.HEAT TREATED AND GROUND

-STRIP CORE DIMENSION: Ф300mm x 5mm, Ф400x 10mm, Ф500mm × 10mm

-WINDING TENSION CONTROL: AC MOTOR WITH VECTOR DRIVE

-SEPARATING METHOD: BY PLASTIC DISC AT BOTH SIDE OF STRIP CORE

PNEUMATIC SYSTEM

-FRL UNIT

-SOL. VALVE AND STANDARD ASS'Y

ELECTRIC SYSTEM

-MAIN POWER SOURCE: AC 400V, 50HZ, 3PHASE

-CONTROL SOURCE: AC 200V, 50HZ, SINGLE PHASE

-CONTROL PANEL: SPEED CONTROL / WINDING TENSION CONTROL

-PLC SYSTEM: PLC HARDWARE AND SOFTWARE

-MAIN OP DESK: SELF STANDING TYPE